FISH GRADE POLYVINYL CHLORIDE (PVC) SPECIFICATION
 

 
 PRINTABLE VERSION CLICK HERE [ADOBE PDF READER REQUIRED]
 

20 MIL FISH GRADE PVC: BLACK
 NON-REINFORCED

PROPERTIES

TEST METHOD

REQUIRED PGI 1197

TYPICAL VALUE

Gauge (nominal) (mil)

-

20.0

 

Profile thickness

ASTM D-1593

19.0

19.7-20.4

(minimum +/- 5%) (mil)

 

 

 

Specific gravity

ASTM D792

1.20

1.2980

( minimum)

 

 

 

Min. Tensile Properties

ASTM D-882

 

 

1. breaking factor

method A or B

46

MD 65

(lbs/inch width) (1" wide)

 

 

TD 60

2. elongation at break

method A or B

325

MD 450

(%) (2" jaw separation)

 

 

TD 400

3. modulus (force) at 100% elongation

method A or B

20

MD 35

(lbs/inch width)

 

 

TD 30

Tear Resistance (lbs, min)

ASTM D-1004 (Die C)

6

MD 7.0

 

 

 

TD 8.0

Low Temperature, C

ASTM 1790

-15

pass

Water Extraction (% loss maximum)

ASTM D1204
(as modified by NSF)

0.25

0.05

Dimensional Stability

ASTM D1204

+/- 5

pass

each direction, % change maximum)

(212 F, 15 minutes)

 

 

Volatility Loss

ASTM 1203 Meth. A

0.9

0.45

(% loss maximum)

 

 

 

Microtox Testing

 

 

pass

Daphnia Testing

 

 

pass

(fish survival and reproduction)

 

 

 

 

The values listed above are typical properties and are intended to be used as guidelines only. No guarantee or warranty regarding performances of this product is made by GeoCHEM, Inc. as the manner of use, handling and conditions are beyond our control. Install in accordance with accepted industry standards.

 
 PRINTABLE VERSION CLICK HERE [ADOBE PDF READER REQUIRED]
 

35 MIL FISH GRADE PVC: BLACK
NON REINFORCED

PROPERTIES

TEST METHOD

REQUIRED PGI 1197

TYPICAL VALUE

Gauge (nominal) (mil)

-

30.0

 

Profile thickness

ASTM D-1593

34.0

34.5-35.5

(minimum +/- 5%) (mil)

 

 

 

Specific gravity

ASTM D792

1.20

1.270

( minimum)

 

 

 

Min. Tensile Properties

ASTM D-882

 

 

1. breaking factor

method A or B

69

MD 99

(lbs/inch width) (1" wide)

 

 

TD 92

2. elongation at break

method A or B

325

MD 480

(%) (2" jaw separation)

 

 

TD 490

3. modulus (force) at 100% elongation

method A or B

30

MD 46

(lbs/inch width)

 

 

TD 43

Tear Resistance (lbs, min)

ASTM D-1004 (Die C)

8

MD 13.0

 

 

 

TD 13.0

Low Temperature, C

ASTM 1790

-20

pass

Water Extraction (% loss maximum)

ASTM D1204
(as modified by NSF)

0.25

0.03

Dimensional Stability

ASTM D1204

+/- 5

pass

(each direction, % change maximum)

(212 F, 15 minutes)

 

 

Volatility Loss

ASTM 1203 Meth. A

0.7

0.40

(% loss maximum)

 

 

 

Microtox Testing

 

 

pass

Daphnia Testing

 

 

pass

(fish survival and reproduction)

 

 

 

 

The values listed above are typical properties and are intended to be used as guidelines only. No guarantee or warranty regarding performances of this product is made by GeoCHEM, Inc. as the manner of use, handling and conditions are beyond our control. Install in accordance with accepted industry standards.


Return To Geomembranes Products Page

Return To PVC Products Page

GeoCHEM, Inc. 907.562.5755 Fax 206.219.3740

Divider

 [HOME | PRODUCTS | SPECIALS | RELATED INFORMATION]
[CONTACT US! | WHAT'S NEW | ABOUT]

 Divider

GeoCHEM, Inc. Business Page © 1997 - 2005 GeoCHEM, Incorporated All Rights Reserved.
Visit Often for Our Latest Page Developments And Updates! Last Updated: 10/17/2013 01:13:27 PM