State of Idaho

Department of Transportation Specifications

December, 2011

IDT

Idaho DOT does not follow AASHTO M 288 for their geotextile specification. Below are our geotextile products that meet the Idaho DOT geotextile specification, listed by their application. Our geotextiles are not listed on the Idaho DOT QPL and the table below is offered as a guideline only.

Click on the red product name for a data sheet.

Geogrids are handled as a special provision and do not require QPL inclusion. Please forward us the geogrid specification and we will make a recommendation.

 

SPECIFICATION APPLICATION NON WOVEN WOVEN COMPOSITE GRID
718.06 Drainage Geotextile Type 1
GEO-3.1-80NW
-- -- --
718.06 Drainage Geotextile Type 2
GEO-7.0-180NW
-- -- --
718.06 Riprap/Erosion Control Geotextile Type 1
GEO-6.0-160NW
-- -- --
718.06 Riprap/Erosion Control Geotextile Type 2
GEO-7.0-205NW
-- -- --
718.07 Subgrade Separation Geotextile Type 1 GEO-7.0-180NW
GEO-200W
-- --
718.07 Subgrade Separation Geotextile Type 2 GEO-10.0-250NW
GEO-315W
-- --
718.08 Pavement Overlay Geotextile

GEO-90P

-- -- --

More resources may be found on the web:

State QPL information:

NOTES:
The above information is to be used only as a guide.
Products on the above list can change without notice.

Areas Served:
We are proud to serve the geotextile needs of the State of Idaho, including: Boise, Nampa, Meridian, Idaho Falls, Pocatello, Caldwell, Coeur d'Alene, Twin Falls, Lewiston, Post Falls, Rexburg, Moscow, Eagle, Kuna, Mountain Home, Chubbuck, Ammon, Hayden, Blackfoot, Garden City, Jerome, Burley, Hailey, Payette, Sandpoint, Rathdrum, Emmett, Star, Rupert, Middleton, Weiser, Preston, Fruitland, American Falls, Shelley, Buhl, Rigby, Gooding, St. Anthony, Kimberly, Orofino, Grangeville, Salmon, Heyburn, Soda Springs, McCall, Wendell, Ketchum, Homedale, Montpelier, Bonners Ferry, Filer, St. Maries, Dalton Gardens, Bellevue, Kellogg, Malad City, Aberdeen, Parma, Spirit Lake and all other areas of Idaho.