FOR PRINTABLE COPY OF THE MSDS For PERCOL DOPEY SOUP CLICK HERE [PDF READER REQUIRED]

PERCOL DOPEY SOUP MATERIAL SAFETY DATA

Product Name: Percol Dopey Soup “A” & “B” Polymer Components

Date Prepared: 10/29/2002

Product and Company Identification

Manufacturer’s Name: GeoCHEM, Inc./RSI
Address: 13586 Pumice Street, Norwalk, CA 90650
Telephone Number: 907-562-5755
Emergency Number: 800-535-5053 INFOTRAC

Hazardous Ingredients

Components: “A” Diphenylmethane-4, 4’ Diisocyanate, Silica Quartz

Precautions for safe handling

Store below 120º in tightly-closed containers to prevent unnecessary exposure. Respiratory protection must be worn during cleanup. Cover spill with absorbent material, move to open container in well-ventilated area. Treat with decontamination solution of 93% water, 5% concentrated ammonia and 2% detergent. Leave container open for 24-48 hours before disposing in accordance with Federal, State and local environmental control regulations.

Physical/Chemical Characteristics

Boiling Point: 428º F, 536º F
Specific Gravity: (H2O)=1) 1.084, 0.942-.948
Vapor Pressure (mm Hg.):NE
Melting Point: N/A
Vapor Density: (AIR=1) 9.9
Evaporation Rate: (Butyl Acetate=1) NE
Solubility in Water: Insoluble, reacts with water to form carbon dioxide gas.
Appearance and Odor: Pale amber, odorless liquid
Reactivity: Stable, under normal, recommended storage conditions.
Conditions to avoid: Open flame and storage temperatures above 120ºF. Contact with oxidizing materials.
Incompatibility: (materials to avoid) Water
Hazardous Decomposition or Byproducts: Carbon monoxide and dioxide, nitrogen oxidess, sulfer oxides, and traces of HCN.

Hazard Data

Flash Point (method used): 248ºF COC
Flammable Limits: N.E.
LEL: N.E.
UEL: N.E.
Extinguishing Media: Dry chemical, foam, carbon dioxide and water spray.
Special Fire Fighting Procedures: Fire fighters should wear self-contained breathing apparatus. During a fire, toxic gases are generated. Use water to cool fire exposed containers. Eliminate all sources of ignition.
Unusual Fire and Explosion Hazards: None.
Hazardous Polymerization: Conditions to avoid: Exposure to temperatures above 400ºF, contact with materials listed under “Incompatibility”.

Health Hazard Data: Inhalation of excessive concentrations of vapors or mists may cause irritation of the nose, throat, eyes and skin. Some individuals may develop isocyanate hypersensitization. Symptoms may be delayed as much as 8 hours. If contact with eyes occur, flush immediately (remove contact lenses if applicable), seek medical attention. Crystalline silica (quartz) may cause abrasion of the cornea. Silica is classified as a probable human carcinogen.

Signs and Symptoms of Exposure:
Fatigue, dizziness, nausea, headache, tearing, blurred vision, an allergic sensitivity producing reddening, swelling or blistering of the skin. Medical conditions generally aggravated by exposure include pre-existing unspecified bronchial hypersensitivity and potentially, any allergies.

 
FOR PRINTABLE COPY OF THE MSDS For PERCOL DOPEY SOUP CLICK HERE [PDF READER REQUIRED]

[Return To Percol Dopey Soup Product Page]
[Return To Percol Main Page]

 GeoCHEM, Inc. Specifications Page © 1997 - 2005 GeoCHEM, Incorporated All Rights Reserved.
Visit Often for Our Latest Page Developments And Updates! Last Updated: 04.05.07 07:37:04 PM