GeoCHEM, Incorporated
-Civil Construction & Land Protection Products and Services Since 1982-

HomeProductsSpecialsRelated InformationContact Us!What's NewAbout


A PERCoat Kit Includes: 

1. PERCoat "A"
2. PERCoat "B"


10-Gal PERCoat Kit (5 GALS EACH OF "A" & "B") 
2-Gal PERCoat Kit (1 GAL EACH OF "A" & "B") 
1-gal PERCoat (1/2 GAL EACH OF "A" & "B") 


PERCOAT is not a significant skin or eye irritant. Nevertheless, skin or eye contact may lead to sensitization. Appropriate protection is necessary. Gloves and safety glasses are required for handling PERCOAT.  Wash hands before eating, drinking or smoking after handling PERCOAT.

Surface Preparation

Sandblast or shot blast surfaces. Dry wet surfaces. Moist surfaces create weak bond and foaming.


"B" component contains pigments that settle. Shake vigorously to disperse pigment in "B" component. Proportion "A" and "B" components in equal volume. combine "A" and "B" and mix thoroughly for about a minute. Components are chilled prior to application to slow reaction and increase working time. Working time is about 6 minutes at 750 F. Apply to concrete deck quickly to extend working time. Energy of the reaction is absorbed by the concrete slowing the reaction. Caution: Do not apply In areas of high humidity.  Installation

Pour mixture on floor and even out with a squeegee. Back-roll with a short-napped roller to smooth coating.  Apply thin (about 4 to 5 mils per pass).  For a textured coating, cover first coating with 50 mesh sand to refusal. Remove excess sand after about an hour. Cover with a thin coat of PERCOAT, followed by a second coat in about another hour. Application temperature 250 0 C to 40 0 C  (14 0 F to 104 0 F)  Cure

Wait one hour minimum at 75 0F. before subjecting to light loading or traffic. For full service, cure at least two hours at 75 0F.  Cold temperatures slow cure. At 55 0 F, three hours cure is needed before light traffic, and 6 hours for full traffic.  Shelf Life

PERCOAT shelf life is one year when stored indoor, unopened under cool & dry conditions.

Pail Disposal

Dispose empty pails in accordance with all local, state and federal regulations.

First Aid

IF INHALED: Remove to fresh air, if not breathing, give artificial respiration, preferably mouth-to-mouth. If breathing is difficult, give oxygen, call a physician. SKIN CONTACT: Wash skin with soap and water. Remove contaminated clothing. EYE CONTACT: Flush with water, continue for at least 15 minutes. Call a doctor.  Spill or Leak

In case of a liquid spill of unmixed materials A & B absorb spilled material with sawdust or other absorbent, sweep into a waste container, neutralize with decontamination solution (95% water, 5% ammonia, 2% detergent) and store open container outdoors for a minimum of 24 hours. Dispose neutralized waste in accordance with federal, state, and local government environmental regulations. 

  Return To Percol Products Page   


Armored Nosing and Joint Repair Control Joints Deep Spall Repair
Full Depth Crack Repair Header and Joint Replacement Isolation Joint At Retaining Wall
Joint Repair Using Existing Headers Protective Surface Overlay Slip Joint Surface Repair
  Traffic Sensor Loop  


Recommendations for product use are based on tests believed to be reliable.  Field conditions vary widely.  For this reason, the user must determine product suitability for the particular use and specific method(s) of application.  THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective.  NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR LOSS OR DAMAGE, DIRECT, INCIDENTAL OR CONSEQUENTIAL, REGARDLESS OF THE LEGAL THEORY ASSERTED, INCLUDING NEGLIGENCE AND/OR STRICT LIABILITY.  The foregoing may be altered only by an agreement signed by officers of seller and manufacturer.  WARRANTY:  The recommendation for the use of our products are based on tests believed to be reliable.  However, we do not guarantee the results to be obtained by others under different conditions.  NOW WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE IS MADE.  Nothing in this data sheet is intended as a recommendation to use our products so as to infringe on any patent.



GeoCHEM, Inc. Specifications Page © 1997 - 2011 GeoCHEM, Incorporated All Rights Reserved.
Visit Often for Our Latest Page Developments And Updates! Last Updated: 09.20.16 01:43:47 PM