|
      
|
PERCOL Alligator Glue ™
DESCRIPTION
PERCOL Alligator Glue with aggregates creates quick
setting, asphalt repairs. Within an hour of placement, durable, long lasting
repairs are ready for traffic. Withstands vibration, heavy traffic loads,
and thermal movement. Applied as a thin coating or full depth for pothole
repair.
USES
PERCOL Alligator Glue forms a flexible polymer concrete
with sand and aggregates. Seals block cracked and alligatored areas; repairs
wide and Solidifies in about 10 minutes. The reaction is fast.
Equal volume, "A" and "B" liquid polymers are combined. After the mix warms
it is poured over aggregates. The mass solidifies in about 10 minutes and
cures to a flexible polymer concrete suitable for repairing asphalt, narrow
cracks, and small potholes; smooths raveled asphalt and fills ruts. A sand
topped coat protects asphalt from fuel and water damage.
Bonds without Primer: No prime or tack
coat. Also bonds to concrete, steel, or wood.
Seals and Protects: Creates flexible waterproof
repairs that protect asphalt from water erosion, fuel and oil spillage.
Fast Repairs and Cure: Solidifies in about
10 minutes. Traffic ready within about one hour of placement.
Safe to Use, No Odor: PERCOL Alligator Glue
has a high flash point, contains no peroxides or heavy metals, and
is odorless. There are no toxic fumes during application.
PACKAGING
Kits comprised of equal volumes of "A" and "B" components
are packaged in 55 gallon drums, 15 gallon barrels, or 5 gallon pails.
Stored indoors, shelf life is 12 months in unopened containers. For small
jobs use PERCOL Alligator Glue from convenient Six Packs (3 each
1/2 gallons of "A" and "B" components).
INSTRUCTIONS
Read Material Safety Data and the Installation Instructions
before using product. PERCOL Alligator Glue can
be used in dry weather oniy. For best performance, install at 50 deg. F.
to 100 deg. F. ambient temperature and 60 deg. F. to 80 deg. F. material
temperature. Do not apply during rain or on wet surfaces.
|
Repairing Asphalt
1.
Remove loose and unsound material.
2. Blow clean with dry compressed air.
3. Fill pot holes with clean, dry crushed rock
to
grade. Fill cracks with 16 mesh sand
4. Flood with PERCOL Alligator Glue.
5. Add sand topping for high traction surface
and to match pavement appearance. |
Alligatored Asphalt
1.
Blow area clean with dry compressed air.
2. Fill cracks with 16 mesh sand.
3. Flood with PERCOL Alligator Glue.
4. Add sand topping for high traction surface
and to match pavement appearance.
5. Aligator Glue cure is slowed when spread in
a thin film. Allow 2 hour cure before resuming
traffic. |
TYPICAL PROPERTIES
|
APPLICATION |
|
|
CURED |
|
|
Component |
"A" |
"B" |
Specific Gravity
ASTM D-792 |
1.08 |
|
Ratio, A:B, weight or volume |
1 |
1 |
Hardness, Durometer D
ASTM D-2240 |
50 |
|
Viscosity @ 73 deg. F, cps |
70 |
100 |
Tensile Strength, psi
ASTM D-412 |
1600 |
|
Appearance |
Brown |
Black |
Elongation at Break %
ASTM D-412 |
150 |
|
Specific Gravity @ 73 deg. F |
1.11 |
1.03 |
Tear Strength
ASTM D-624 |
<100 |
|
|
|
|
Compression Strength, psi
ASTM C-39 |
1000 |
|
MIXED |
|
|
Coefficient Linear Thermal Expansion, 10 deg. X IN/IN/deg.
F
ASTM D-698 |
73 |
|
Pot life @ 73 deg. F |
10 |
Minutes |
|
|
|
Cure Time @ 73 deg. F |
60 |
Minutes |
|
|
|
Mixed Color |
Black |
|
|
|
IMPORTANT NOTICE:
Recommendations for product use are based on tests believed
to be reliable. Field conditions vary widely. For this reason,
the user must determine product suitability for the particular use and
specific method(s) of application. THE FOLLOWING IS MADE IN LIEU
OF ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Sellers and
manufacturers only obligation shall be to replace such quantity of the
product proved to be defective. NEITHER SELLER NOR MANUFACTURER SHALL
BE LIABLE FOR LOSS OR DAMAGE, DIRECT, INCIDENTAL OR CONSEQUENTIAL, REGARDLESS
OF THE LEGAL THEORY ASSERTED, INCLUDING NEGLIGENCE AND/OR STRICT LIABILITY.
The foregoing may be altered only by an agreement signed by officers of
seller and manufacturer.
Return To Percol
Products Page
[HOME
| PRODUCTS | SPECIALS
| RELATED INFORMATION]
[CONTACT
US! | WHAT'S NEW
| ABOUT]

GeoCHEM, Inc. Specifications Page ©
1997 - 2007 GeoCHEM, Incorporated All Rights Reserved.
Visit Often for Our Latest
Page Developments And Updates! Last Updated:
04.12.07 03:00:08 PM
|