logo_small.jpg
     
  How much product will I need ?  
  (See tabs at top of page for additional resources)  
 
  1)  Enter the length of the crack in linear feet.  
  2)  Enter the width of the crack in inches.  
  3)  Enter the depth of the crack in inches.  
     
  Length   Width   Depth  
  in Feet   in Inches   in Inches  
     
       
     
  Gallons Of Polymer required  *
       
  Pounds Of Sand required   *
*All calculations are estimates only and based on 2 parts sand and 1 part polymer.
Each 21oz. Cartridge contains 1/6 (.17 of a gallon approx).
logo_small.jpg
 
  How many kits of GeoFlo or GeoSet will I need ?  
 
  1)  Enter the length of your repair  area in inches.
  2)  Enter the width of your repair area in inches.  
  3)  Enter the depth of your repair area in inches.
  4)  Hit enter and an estimate with and without   
        Aggregate will appear.    
     
  Length   Width   Depth  
  in Inches   in inches   in inches  
     
       
     
  Number of Kits required: *
  Number of Kits required      
  If using Sand:   *
  *All calculations are estimates only.      
                     
      Linear Feet Per 600 MIL Cartridge No Sand
      AVERAGE CRACK WIDTH
      1/8 Inch 1/4 Inch 3/8 Inch 1/2 Inch 5/8 Inch 3/4 inch 7/8 inch 1 Inch
  A 1/8 inch
  V 1/4 inch
  G 3/8 Inch
    1/2 Inch
  D 5/8 Inch
  E 3/4 Inch
  P 7/8 inch
  T 1 Inch
  H All Calculations are an estimate based on averaged dimensions. Your results may vary
     
  Linear Feet Per 600 MIL Cartridge 1 Part Sand 1 Part Polymer
      AVERAGE CRACK WIDTH
      1/8 Inch 1/4 Inch 3/8 Inch 1/2 Inch 5/8 Inch 3/4 inch 7/8 inch 1 Inch
  A 1/8 inch
  V 1/4 inch
  G 3/8 Inch
    1/2 Inch
  D 5/8 Inch
  E 3/4 Inch
  P 7/8 inch
  T 1 Inch
  H All Calculations are an estimate based on averaged dimensions. Your results may vary
   
  Linear Feet Per 600 MIL Cartridge 2 Parts Sand 1 Part Polymer
      AVERAGE CRACK WIDTH
      1/8 Inch 1/4 Inch 3/8 Inch 1/2 Inch 5/8 Inch 3/4 inch 7/8 inch 1 Inch
  A 1/8 inch
  V 1/4 inch
  G 3/8 Inch
    1/2 Inch
  D 5/8 Inch
  E 3/4 Inch
  P 7/8 inch
  T 1 Inch
  H All Calculations are an estimate based on averaged dimensions. Your results may vary