Penetrates & Rebonds - Penetrates and re-bonds thin, hairline, spider
cracks for a load bearing asphalt repair.
Seals and Protects - Waterproofs, protects from freeze/thaw breakup of
asphalt. Smoothes rough surfaces. Restores traction surfaces.
Fast Repairs and Cure - Solidifies in less than 3 minutes. Ready for
traffic in 10 minutes.
Repairs Year Round - Successful repairs in cold or hot weather.
Safe to Use, Low Odor - PERCOL Asphalt Welder is non-flammable. There are
no peroxides or heavy metals. There is little odor on application, and it is
safe to use. See product safety data for more information.
PACKAGING:
"A" and "B" components are packaged in equal volumes
in 55 gallon drums, 15 gallon barrels, or 5 gallon pails. Shelf life
is 12 months in unopened containers stored indoors. For small jobs apply
PERCOL
Asphalt Welder from 21 or 53 ounce cartridge kits with hand operated
dispensing guns.
INSTRUCTIONS:
Read Material Safety
Data and the Installation Instructions before using product. PERCOL
Asphalt Welder
performs
well in temperature extremes. For best performance, install PERCOL Asphalt Welder at 10 degrees F. to 100 degrees
F. ambient temperature and 50-75 degrees F. material temperature. Do not apply during rain or on wet surfaces.
BULK APPLICATION EQUIPMENT:
PERCOL dual proportioning system transfers, meters, mixes
and applies PERCOL Asphalt Welder. "A" and "B" components
are transferred from drums, through the proportioning pumps, (1:1 ratio)
to the dispensing gun. Material is mixed at the gun, then dispensed
into repairs.
PERCOL ASPHALT WELDER APPLICATIONS:
Hairline Crack Repair
Blow out cracks with dry compressed air.
Flood with PERCOL Asphalt Welder.
Broadcast clean, dry, uniformly graded san on uncured liquid for high traction surface.
When cured sweep off excess sand.
Restoring Traffic
With PERCOL Asphalt Welder, traffic can resume within 10 minutes of completion of work.
Spider Cracks
Shot blast or sand blast deck surface.
Flood deck with PERCOL Asphalt Welder at the rate of one gallon per 100 square feet.
Immediately broadcast sand to refusal into the uncured liquid.
When cured sweep off excess sand.
Restoring Traffic
With PERCOL Asphalt Welder, traffic can resume within 10 minutes of completion of work.
TYPICAL PROPERTIES
APPLICATION | CURED | |||
Component | Specific Gravity ASTM D-792 |
|||
Ratio, A:B, weight or volume | Hardness, Durometer D ASTM D-2240 |
|||
Viscosity @ 73 deg. F, cps | Tensile Strength, psi ASTM D-412 |
|||
Appearance | Elongation at Break % ASTM D-412 |
|||
Specific Gravity @ 73 deg. F | Tear Strength ASTM D-624 |
|||
Flash Point, deg.F. | Compression Strength, psi
ASTM C-39 |
|||
MIXED | Bond strength to PCC, psi
(asphalt fails cohesively) |
|||
Pot life @ 73 deg. F | ||||
Cure Time @ 73 deg. F | ||||
Mixed Color |