GeoFlo® Rapid Asphalt Repair Slurry Industrial-Grade Pavement Matrix Restoration & Surface Leveling
The Engineered Solution for High-Load Infrastructure. Initially developed for NATO and the USAF for rapid runway repair, GeoFlo® is a high-performance, 100% solids polyurethane slurry designed for industrial-scale asphalt restoration. By utilizing patented polymer-coated aggregates, GeoFlo® creates a massive aggregate interlock that bridges wide-stress cracks and levels sunken "birdbaths" with permanent, load-bearing results.
Key Industrial Performance Features:
-
Structural Load Transfer: Engineered to handle aircraft exceeding 750,000 lbs. Ideal for runways, taxiways, and heavy-freight loading docks.
-
Operational Speed: Rapid-set chemistry ensures the repair is traffic-ready in 30 to 60 minutes, minimizing lane closures and operational downtime.
-
Monolithic Bonding: High-viscosity reactive resin bonds directly to asphalt, steel, and concrete without the requirement of a primer or tack coat.
-
Chemical & Fuel Impermeability: Fully resistant to aviation fuels, hydraulic fluids, cooking oils, and de-icing chemicals.
-
All-Weather Durability: Will not soften in extreme heat or delaminate during freeze-thaw cycles.
-
Coverage Optimization: To extend coverage in deep cracks and potholes, incorporate additional clean, dry crushed rock or Black Rock aggregate into the slurry matrix. This significantly increases volume while maintaining structural interlock.
Primary Applications:
-
Airports: High-load runway and taxiway repairs.
-
Infrastructure: Bridge header transitions and manhole cover sealing.
-
Industrial Facilities: Warehouse floor restoration and forklift "trip-hazard" mitigation.
-
Municipal: Permanent pothole and alligator crack stabilization without "dig-outs."
Product Logistics & Kit Specifications: Each 5-Gallon GeoFlo® Kit (56 lbs) yields 0.5 cubic feet of slurry, covering approximately 50 square feet at 1/8" thickness.
Standard Kit Includes:
-
Polymer-Coated Aggregates: 36 lbs of patented, high-flow treated sand.
-
Part A & B Polymers: Pre-measured reactive resins.
-
Topping Aggregate: 10 lbs of black diamond sand for high-friction anti-skid finishing.
Installation Overview:
-
Mixing: 6-8 minute working life at 75°F. Mixes directly in the supplied pail with a hand drill or Motor Mix Machine.
-
Cure Time: 30-60 minutes (Temperature dependent. Catalyst available for sub-58°F applications).
-
Finishing: Self-leveling formula; feathers to grade for a smooth, flush transition.
See it in action!
- GeoFlo & GeoSet Application Video #1
- GeoFlo & GeoSet Application Video #2
- GeoFlo & GeoSet Application Video #3
